Special marking machine for oxygen cylinder
Application features: marked on conical surface, adjustable Angle
The principle of
By putting the contents of Chinese and English characters and graphics to be printed into the computer, the computer marking software converts the contents into digital control signals and transmits them to the controller, driving the printing to produce characters and graphics composed of continuous lattice on the workpiece;The needle moves in a set trajectory in an x-y two-dimensional plane, and the printing needle, under the action of compressed air, prints a concave mark composed of dense lattice on the workpiece surface.The advantage of pneumatic marking machine is through the lattice of higher hardness of metal to achieve online printing.
80*140mm(可选) |
最大打印硬度 |
HRC62 | |
打印头升降高度 |
0~300mm |
压缩空气压力 |
0.3~0.7MPa |
重复打印精度 |
0.02mm |
电压要求 |
AC176~264V |
打印最小字符 |
1mm |
整机功率 |
300W |
打印速度 |
1~3字符/秒 |
环境温度 |
-10℃~50℃ |
系统复位次数 |
1000次 |
连续工作时间 |
>48小时验 |
Product parameters |
|
|
|
80*140mm(可选) |
Maximum print hardness |
HRC62 | |
Print head lifting height |
0~300mm |
Compressed air pressure |
0.3~0.7MPa |
Reprint accuracy |
0.02mm |
Voltage requirements |
AC176~264V |
Print min |
1mm |
Engine power |
300W |
The printing speed |
1~3字符/秒 |
environment temperature |
-10℃~50℃ |
System reset times |
1000次 |
Continuous working time |
>48小时验 |